Before diving into full-blown feature testing or complex integrations, it’s essential to verify that your SR-Linux topology even works at a basic level. That’s where smoke testing comes in. This article walks through how to perform automated smoke tests on
Category: SR-Linux
Deploy a Nokia SR-Linux MC-LAG Lab in Seconds with Containerlab
The revolution in network labs is real! A few years ago, setting up and testing a network architecture required purchasing physical devices, cabling them together, and enduring the noise of spinning fans, all just to run a few commands and
Configure Layer 2 Multi-homing and Layer 3 EVPN on Nokia SR-Linux
This article shows how to configure the network from scratch, step-by-step, layer 2 with multi-homing, and Layer 3 EVPN and VXLAN on the SR-Linux platform. It assumes you have a basic knowledge of the mentioned technology, if not, don’t worry.
Basic layer 2 operations on Nokia SR-Linux
In this article, we will dive into a brand-new Nokia network operating system – SR-Linux, which is available on a Nokia 7220 series. We will focus mainly on the basic L2 operations on this platform. Topology The topology for this